LArSoft

Logo

Software for Liquid Argon time projection chambers

View My GitHub Profile

Debugging with gdb

Set up of gdb in a LArSoft environment

The GNU debugger (gdb) is distributed with UPS for Linux machines. The usual UPS magic:

ups list -aK+ gdb

will show all the available versions, and you should always set up the newest one.

Do not use the version of the debugger installed in the system unless it’s newer than all the ones UPS provides!

Today, /grid/fermiapp/products/larsoft offers: setup gdb v7_10_1.

If you are on OSX, you haven’t a gdb distributed by LArSoft. You can use system lldb and cross your fingers…

Segmentation fault!

Let’s say that I want to check where a particle is actually generated when running prodsingle.fcl.
I have created my working area with a bleeding prof qualifier because I have no time to waste, checked out larsim, and I added the lines:

auto const& pos = mct.GetParticle(0).Position();
mf::LogTrace("SingleGen") << "The first particle is at x,y = " << pos.X() << "," << pos.Y();

to SingleGen::Sample().
Then I execute lar -c prodsingle.fcl -n 10 and I get:

Begin processing the 1st record. run: 1 subRun: 0 event: 1 at 06-Jul-2016 18:45:35 CDT
%MSG-w BackTracker:  PostSource 06-Jul-2016 18:45:35 CDT  run: 1 subRun: 0 event: 1
failed to get handle to simb::MCParticle from largeant, return
%MSG
Segmentation fault: 11

Hmm. Something is wrong with the BackTracker! Maybe.

Segmentation faults are among the easiest things to track with gdb.
I just run: gdb --args lar -c prodsingle.fcl -n 10 and at the prompt, I type

(gdb) run

and wait.

While writing this, I am on OSX, so I am running lldb. The output I show will be from lldb, but it’s not dissimilar from gdb.
With llvm, the command is lldb -- lar -c prodsingle.fcl -n 10 and to run the program you use process launch (ok, ok: run will also work).

The debugger shows all the libraries it loads, and then the normal output starts.
At the end, we get to the point. In lldb it looks like:

(lldb) process launch
[...]
Process 10721 stopped
* thread #1: tid = 0x1c03c3, 0x00000001064ec1cc libSimulationBase.dylib`simb::MCTrajectory::Position(unsigned long) const + 12, queue = 'com.apple.main-thread', stop reason = EXC_BAD_ACCESS (code=1, address=0x28)
    frame #0: 0x00000001064ec1cc libSimulationBase.dylib`simb::MCTrajectory::Position(unsigned long) const + 12
libSimulationBase.dylib`simb::MCTrajectory::Position:
->  0x1064ec1cc <+12>: addq   (%rdi), %rax
    0x1064ec1cf <+15>: retq

libSimulationBase.dylib`simb::MCTrajectory::Momentum:
    0x1064ec1d0 <+0>:  shlq   $0x7, %rsi
    0x1064ec1d4 <+4>:  pushq  %rbp

This shows the code where the EXC_BAD_ACCESS (that is, try to access invalid memory address, that provokes a segmentation violation) happens.
It is in simb::MCTrajectory::Position(unsigned long) const, and the instruction is… addq (%rdi), %rax. Urgh.
We see assembly code, probably because we are in the middle of an C source line. Similar view blesses us if the debugger can’t find the source code. To fix this, see the following subsection.
For now we ignore that, because we trust nutools (where simb::MCTrajectory lives).
How did we even get there? We want to trace back our path, that we do with

backtrace 10

(to see up to 10 entries in the path that led us here). Short in gdb: bt 10; in lldb, also thread backtrace --count 10:

(lldb) thread backtrace --count 10
* thread #1: tid = 0x1c03c3, 0x00000001064ec1cc libSimulationBase.dylib`simb::MCTrajectory::Position(unsigned long) const + 12, queue = 'com.apple.main-thread', stop reason = EXC_BAD_ACCESS (code=1, address=0x28)
  * frame #0: 0x00000001064ec1cc libSimulationBase.dylib`simb::MCTrajectory::Position(unsigned long) const + 12
    frame #1: 0x000000010a1c8d98 liblarsim_EventGenerator_SingleGen_module.dylib`evgen::SingleGen::Sample(simb::MCTruth&amp;) [inlined] simb::MCParticle::Position(i=909267456, this=<unavailable>) const + 40 at MCParticle.h:221
    frame #2: 0x000000010a1c8d8a liblarsim_EventGenerator_SingleGen_module.dylib`evgen::SingleGen::Sample(this=0x000000010e9b5820, mct=0x00007fff5fbee4a0) + 26
    frame #3: 0x000000010a1c9867 liblarsim_EventGenerator_SingleGen_module.dylib`evgen::SingleGen::produce(this=0x000000010e9b5820, evt=0x00007fff5fbee720) + 103 at SingleGen_module.cc:262
    frame #4: 0x0000000102e3186f libart_Framework_Core.dylib`art::EDProducer::doEvent(art::EventPrincipal&amp;, art::CurrentProcessingContext const*) + 63
    frame #5: 0x0000000102c884a1 libart_Framework_EventProcessor.dylib`bool art::Worker::doWork<art::OccurrenceTraits<art::EventPrincipal, (art::BranchActionType)0> >(art::OccurrenceTraits<art::EventPrincipal, (art::BranchActionType)0>::MyPrincipal&amp;, art::CurrentProcessingContext const*) + 129
    frame #6: 0x0000000102c894ad libart_Framework_EventProcessor.dylib`void art::Path::processOneOccurrence<art::OccurrenceTraits<art::EventPrincipal, (art::BranchActionType)0> >(art::OccurrenceTraits<art::EventPrincipal, (art::BranchActionType)0>::MyPrincipal&amp;) + 333
    frame #7: 0x0000000102c89e78 libart_Framework_EventProcessor.dylib`void art::Schedule::processOneOccurrence<art::OccurrenceTraits<art::EventPrincipal, (art::BranchActionType)0> >(art::OccurrenceTraits<art::EventPrincipal, (art::BranchActionType)0>::MyPrincipal&amp;) + 392
    frame #8: 0x0000000102c8a348 libart_Framework_EventProcessor.dylib`void art::EventProcessor::processOneOccurrence_<art::OccurrenceTraits<art::EventPrincipal, (art::BranchActionType)0> >(art::OccurrenceTraits<art::EventPrincipal, (art::BranchActionType)0>::MyPrincipal&amp;) + 264
    frame #9: 0x0000000102c6e299 libart_Framework_EventProcessor.dylib`art::EventProcessor::processEvent() + 25

The second “frame” (#1) is in the method we just changed. Let’s go with that:

(gdb) up

or:

(lldb) frame select --relative +1
frame #1: 0x000000010a1c8d98 liblarsim_EventGenerator_SingleGen_module.dylib`evgen::SingleGen::Sample(simb::MCTruth&amp;) [inlined] simb::MCParticle::Position(i=0, this=<unavailable>) const + 40 at MCParticle.h:221
   218  inline       std::string     simb::MCParticle::EndProcess()             const { return fendprocess;              }
   219  inline       int             simb::MCParticle::NumberDaughters()          const { return fdaughters.size();            }
   220  inline       unsigned int    simb::MCParticle::NumberTrajectoryPoints() const { return ftrajectory.size();         }
-> 221  inline const TLorentzVector&amp; simb::MCParticle::Position( const int i )  const { return ftrajectory.Position(i);  }
   222  inline const TLorentzVector&amp; simb::MCParticle::Momentum( const int i )  const { return ftrajectory.Momentum(i);  }
   223  inline       double          simb::MCParticle::Vx(const int i)          const { return Position(i).X();            }
   224  inline       double          simb::MCParticle::Vy(const int i)          const { return Position(i).Y();            }

… and this one points to the method we are calling, MCParticle::Position(). One step up brings us to…

(lldb) frame select --relative +1
frame #2: 0x000000010a1c8d8a liblarsim_EventGenerator_SingleGen_module.dylib`evgen::SingleGen::Sample(this=0x000000010e9b5820, mct=0x00007fff5fbee4a0) + 26
   1    ////////////////////////////////////////////////////////////////////////
   2    /// \file  MCParticle.h
   3    /// \brief Particle class
   4    /// \version $Id: MCParticle.h,v 1.16 2012-11-20 17:39:38 brebel Exp $
   5    /// \author  Brian Rebel
   6    ////////////////////////////////////////////////////////////////////////
   7

… the void. The failure of the debugger to point us to the actual code is likely due to optimisations by the compiler, which prunes and mixes the code. The effect can be apparently wrong, as in this case, or misleadingly wrong (i.e., pointing to an actual line of code, but not the right one).
If we had used debug qualifiers, we could in fact directly see this pointer that the debugger says “”, and it would probably show a value of `0x0`. Now, `this` pointer is the location in memory of the `MCParticle` we are printing the position of, and, sure as SEGV, this must not point to `0x0` (also known as `0`, `NULL` or `nullptr`, and intrinsically evil to use). It would probably also have pointed to the first of the two lines of code we added. By using

print mct.NParticles()

we would have found that there are in fact no particles in the MCTruth yet, and finally realised that we printed the particles before we create them.
lldb has serious problems with evaluating expressions in my machine:

(lldb) expression mct.NParticles()
error: call to a function 'MCTruth::NParticles() const' ('_ZNK7MCTruth10NParticlesEv') that is not present in the target
error: 0 errors parsing expression
error: The expression could not be prepared to run in the target

So: before this gets too deep, rebuild with debugging qualifiers (and maybe in a Linux system!).

Oh, and type quit to exit the debugger.

Executing my module step by step

Now we need to look in detail to the flow of a module, and read the position of the generated particles on the fly!
The lesson we have learned from the previous experience above is: use the debug qualifier.
So we first set up larsoft in a Linux machine and set up gdb as above. Then, as above, we start the debugger.

setup gdb v7_10_1
setup larsoft v05_14_00 -q e9:debug
gdb --args lar -c prodsingle.fcl

If we want to execute a module line by line, the hard part is to get access to the module itself: before it gets to our code, art has a long way to go.
So we set a breakpoint to the method we are interested in:

(gdb) break evgen::SingleGen::SampleOne
Function "evgen::SingleGen::SampleOne" not defined.
Make breakpoint pending on future shared library load? (y or [n]) y
Breakpoint 1 (evgen::SingleGen::SampleOne) pending.

What’s going on? evgen::SingleGen::SampleOne is in a library (I guess, liblarsim_EventGenerator_SingleGen_module.so) that art will load as soon as it knows we need the SingleGen module. Until then, gdb does not know about the existence of that method, that class nor that library.
But it kindly asks us if it should try later, when it loads new libraries - we answered y.

On some terminal configurations (probably including tmux and screen), gdb is so confused that it thinks there is nobody behind the keyboard, and therefore will automatically answer that question with n. In that (frustrating) case, I use to start the job (run) and after I think it has loaded the library I need, hit +, try to set the breakpoint again, and then `continue` the execution. In the worst case, I let the job run once in full, after which the library stays loaded and then I can st the breakpoint and `run` a second time.

Then, run. And wait.

Breakpoint 1, 0x00007fffdda6a138 in evgen::SingleGen::SampleOne(unsigned int, simb::MCTruth&amp;)@plt ()
   from /grid/fermiapp/products/larsoft/larsim/v05_14_00/slf6.x86_64.e9.debug/lib/liblarsim_EventGenerator_SingleGen_module.so
(gdb)

Where are we?

(gdb) backtrace 5
#0  0x00007fffdda6a138 in evgen::SingleGen::SampleOne(unsigned int, simb::MCTruth&amp;)@plt ()
   from /grid/fermiapp/products/larsoft/larsim/v05_14_00/slf6.x86_64.e9.debug/lib/liblarsim_EventGenerator_SingleGen_module.so
#1  0x00007fffdda7577b in evgen::SingleGen::Sample (this=0x1cb3ea0, mct=...) at /scratch/workspace/larsoft-v05_14_00/SLF6/debug/build/larsim/v05_14_00/src/larsim/EventGenerator/SingleGen_module.cc:383
#2  0x00007fffdda74586 in evgen::SingleGen::produce (this=0x1cb3ea0, evt=...) at /scratch/workspace/larsoft-v05_14_00/SLF6/debug/build/larsim/v05_14_00/src/larsim/EventGenerator/SingleGen_module.cc:262
#3  0x00007ffff0b80771 in art::EDProducer::doEvent (this=0x1cb3ea0, ep=..., cpc=0x7ffffffefe90)
    at /scratch/workspace/nu-release-build/v1_22_00/s30-e9/debug/build/art/v1_17_07/src/art/Framework/Core/EDProducer.cc:28
#4  0x00007ffff0c2748c in art::WorkerT<art::EDProducer>::implDoBegin (this=0x1cb2b60, ep=..., cpc=0x7ffffffefe90)
    at /scratch/workspace/nu-release-build/v1_22_00/s30-e9/debug/build/art/v1_17_07/src/art/Framework/Core/WorkerT.h:94
#5  0x00007ffff19ef28c in art::Worker::doWork<art::OccurrenceTraits<art::EventPrincipal, (art::BranchActionType)0> > (this=0x1cb2b60, ep=..., cpc=0x7ffffffefe90)
    at /scratch/workspace/nu-release-build/v1_22_00/s30-e9/debug/build/art/v1_17_07/src/art/Framework/Principal/Worker.h:221

Not sure what that plt is on frame 0, so let’s jump one frame up:

(gdb) up
#1  0x00007fffdda7577b in evgen::SingleGen::Sample (this=0x1cb3ea0, mct=...) at /scratch/workspace/larsoft-v05_14_00/SLF6/debug/build/larsim/v05_14_00/src/larsim/EventGenerator/SingleGen_module.cc:383
383 /scratch/workspace/larsoft-v05_14_00/SLF6/debug/build/larsim/v05_14_00/src/larsim/EventGenerator/SingleGen_module.cc: No such file or directory.

Ugh. This is in larsim, but gdb can’t find it. We fix it as described below:

378    in /scratch/workspace/larsoft-v05_14_00/SLF6/debug/build/larsim/v05_14_00/src/larsim/EventGenerator/SingleGen_module.cc
(gdb) set substitute-path /scratch/workspace/larsoft-v05_14_00/SLF6/debug/build/larsim/v05_14_00/src /grid/fermiapp/products/larsoft/larsim/v05_14_00/source
(gdb) list
378
379     switch (fMode) {
380     case 0: // List generation mode: every event will have one of each
381         // particle species in the fPDG array
382       for (unsigned int i=0; i<fPDG.size(); ++i) {
383     SampleOne(i,mct);
384       }//end loop over particles
385       break;
386     case 1: // Random selection mode: every event will exactly one particle
387             // selected randomly from the fPDG array

That’s better. We are on line 383… close to where we wanted to be, but not quite. So we make a step (that means, we execute an instruction, descending into the function we are calling).

(gdb) step
Single stepping until exit from function _ZN5evgen9SingleGen9SampleOneEjRN4simb7MCTruthE@plt,
which has no line number information.
evgen::SingleGen::SampleOne (this=0x3112e09b45 <do_lookup_x+1861>, i=0, mct=...)
    at /scratch/workspace/larsoft-v05_14_00/SLF6/debug/build/larsim/v05_14_00/src/larsim/EventGenerator/SingleGen_module.cc:276
276   void SingleGen::SampleOne(unsigned int i, simb::MCTruth &amp;mct){

Ok, we are in the function. Actually, we want to see the value of that first particle, don’t we? Let’s take a look at where we want to go, by printing 100 lines of code after the current one:

list 276,375
[...]
363     std::string primary("primary");
364
365     simb::MCParticle part(trackid, fPDG[i], primary);
366     part.AddTrajectoryPoint(pos, pvec);
367
368     //std::cout << "Px: " <<  pvec.Px() << " Py: " << pvec.Py() << " Pz: " << pvec.Pz() << std::endl;
369     //std::cout << "x: " <<  pos.X() << " y: " << pos.Y() << " z: " << pos.Z() << " time: " << pos.T() << std::endl;
370     //std::cout << "YZ Angle: " << (thyzrad * (180./M_PI)) << " XZ Angle: " << (thxzrad * (180./M_PI)) << std::endl;
371
372     mct.Add(part);
373   }
374
375   //____________________________________________________________________________

We see that at line 365 the particle is created, and on the next one its position (the first trajectory point) is added.
That seems a good target as any. So we set a temporary breakpoint to that line, we continue until we hit it, and then we explore the data.

(gdb) tbreak 366
Temporary breakpoint 2 at 0x7fffdda75599: file /scratch/workspace/larsoft-v05_14_00/SLF6/debug/build/larsim/v05_14_00/src/larsim/EventGenerator/SingleGen_module.cc, line 366.
(gdb) continue
Continuing.

Temporary breakpoint 2, evgen::SingleGen::SampleOne (this=0x1cb3ea0, i=0, mct=...)
    at /scratch/workspace/larsoft-v05_14_00/SLF6/debug/build/larsim/v05_14_00/src/larsim/EventGenerator/SingleGen_module.cc:366
366     part.AddTrajectoryPoint(pos, pvec);

We could set the position and then recover it from the particle, but it’s simpler to check that promising pos local variable instead:

(gdb) print pos
$1 = {<TObject> = {_vptr.TObject = 0x7ffff7959490 <vtable for TLorentzVector+16>, fUniqueID = 0, fBits = 33554432, static fgDtorOnly = 0, static fgObjectStat = false, static fgIsA = {_M_b = {_M_p =
    0x11d8450}}}, fP = {<TObject> = {_vptr.TObject = 0x7ffff795a950 <vtable for TVector3+16>, fUniqueID = 0, fBits = 33554432, static fgDtorOnly = 0, static fgObjectStat = false, static fgIsA = {
        _M_b = {_M_p = 0x11d8450}}}, fX = 25, fY = 0, fZ = 20, static fgIsA = {_M_b = {_M_p = 0x3355a80}}}, fE = 0, static fgIsA = {_M_b = {_M_p = 0x3348570}}}

TLorentzVector in all its glory.

(gdb) print pos.X()
$2 = 25
(gdb) print pos.Y()
$3 = 0
(gdb) print pos.Z()
$4 = 20

Sounds good enough: let’s do… like, every time.

(gdb) break
Breakpoint 3 at 0x7fffdda75599: file /scratch/workspace/larsoft-v05_14_00/SLF6/debug/build/larsim/v05_14_00/src/larsim/EventGenerator/SingleGen_module.cc, line 366.
(gdb) display pos.X()
1: pos.X() = 25
(gdb) display pos.Y()
2: pos.Y() = 0

The command break without line number or function name sets a permanent breakpoint on the current line.
Also we set a permanent display of those two interesting expressions (tonight I am not interested in Z()).
Since the other breakpoint is now obsolete, let’s remove it:

(gdb) info breakpoints
Num     Type           Disp Enb Address            What
1       breakpoint     keep y   <MULTIPLE>
    breakpoint already hit 2 times
1.1                         y     0x00007fffdda6a138 <evgen::SingleGen::SampleOne(unsigned int, simb::MCTruth&amp;)@plt>
1.2                         y     0x00007fffdda74806 in evgen::SingleGen::SampleOne(unsigned int, simb::MCTruth&amp;)
                                                   at /scratch/workspace/larsoft-v05_14_00/SLF6/debug/build/larsim/v05_14_00/src/larsim/EventGenerator/SingleGen_module.cc:279
3       breakpoint     keep y   0x00007fffdda75599 in evgen::SingleGen::SampleOne(unsigned int, simb::MCTruth&amp;)
                                                   at /scratch/workspace/larsoft-v05_14_00/SLF6/debug/build/larsim/v05_14_00/src/larsim/EventGenerator/SingleGen_module.cc:366
(gdb) delete 1
(gdb) info breakpoints
Num     Type           Disp Enb Address            What
3       breakpoint     keep y   0x00007fffdda75599 in evgen::SingleGen::SampleOne(unsigned int, simb::MCTruth&amp;)
                                                   at /scratch/workspace/larsoft-v05_14_00/SLF6/debug/build/larsim/v05_14_00/src/larsim/EventGenerator/SingleGen_module.cc:366

The command info breakpoints gives their list, and number 1 is the one we want to delete. Cross check: we are left with only the last one (number 3).
When we hit continue, the execution continues through LArG4, SimWire and finally back to SingleGen for the next event. And, lo and behold:

[...]
%MSG-w BackTracker:  PostSource 06-Jul-2016 20:25:39 CDT  run: 1 subRun: 0 event: 2
failed to get handle to simb::MCParticle from largeant, return
%MSG

Breakpoint 3, evgen::SingleGen::SampleOne (this=0x1cb3ea0, i=0, mct=...) at /scratch/workspace/larsoft-v05_14_00/SLF6/debug/build/larsim/v05_14_00/src/larsim/EventGenerator/SingleGen_module.cc:366
366     part.AddTrajectoryPoint(pos, pvec);
2: pos.Y() = 0
1: pos.X() = 25

So, the position is still the same.

Have the debugger point to the right source directory

The debugger has some idea of where to find the source code. That idea is in fact stored in the library, and describes the absolute path of the source code in the machine it was compiled in. If you are using precompiled packages, that path is just bogus.
The GNU debugger will tell you that it can’t find such and such source file, and you can find from that path which UPS package the file is in.
Say it’s nutools. The, we have to provide gdb with the correct path to nutools sources. This is easy:

ls -d "${NUTOOLS_DIR}/source"

will confirm that a source directory is distributed with the nutools UPS package we have set up, at the specified path.
Then we “just” have to tell gdb about this substitution:

(gdb) set substitute-path /where/gdb/is/looking/for/nutools /path/we/just/discovered/products/nutools/v1_24_04/sources

Of course, each time we get into a new precompiled package, we have to do it again.
On the good side, the code where the bug is, that is our own, is compiled locally and it should be promptly available.